How to install radiator
As winter approaches, installing radiators has become the focus of many families. This article will introduce in detail the installation steps and precautions of radiators, as well as heating-related discussions in recent hot topics on the Internet, to help you complete the installation efficiently.
1. Radiator installation steps
The following procedures must be followed when installing radiators to ensure safety and heat dissipation:
| steps | Operation content | Things to note |
|---|---|---|
| 1. Measurement and positioning | Determine the installation location of the radiator and mark the drilling points | 10-15cm away from the ground, away from furniture |
| 2. Drill holes for fixation | Use expansion screws to secure the bracket | Make sure the bracket is level and the load-bearing capacity reaches the standard |
| 3. Connect the pipes | Series or parallel connection to heating system | Check the sealing of the interface to prevent water leakage |
| 4. Install the valve | Install temperature control valve and exhaust valve | Easy to adjust temperature and exhaust air |
| 5. Test run | Fill in water and pressurize, check for leaks | The pressure is maintained at 1.5 times the working pressure |
2. Recent hot topics and content related to radiators
In the past 10 days, discussions on heating and radiators on the Internet have mainly focused on the following hot spots:
| topic | heat index | Related suggestions |
|---|---|---|
| "Energy-Saving Radiator Selection Guide" | 85% | Recommended copper-aluminum composite material, high heat dissipation efficiency |
| “Self heating vs central heating” | 78% | Pay attention to gas safety when heating yourself |
| "Intelligent temperature control system" | 92% | Intelligent valve interface can be reserved during installation |
3. Installation precautions
1.Material selection: Steel radiators are cost-effective, but need to be filled with water for maintenance; copper-aluminum composite is corrosion-resistant and suitable for areas with hard water.
2.Pipe layout: The installation of exposed pipes needs to be beautiful and fixed, and the hidden pipes need to be buried in advance to avoid damaging the decoration later.
3.safety regulations: It is prohibited to cover the radiator with debris to avoid affecting heat dissipation or causing fire.
4. Frequently Asked Questions
Q: What should I do if the radiator is not hot?
A: Prioritize checking whether the exhaust valve is blocked and cleaning the pipe filter.
Q: How to estimate the installation cost?
A: Refer to the table below:
| Project | Unit price (yuan) |
|---|---|
| Ordinary steel radiator | 60-120/piece |
| Installation labor fee | 200-500/group |
| Pipeline modification | 80-150/meter |
Through the above steps and data analysis, you can complete the radiator installation efficiently. If you need further assistance, it is recommended to consult a professional heating company.
check the details
check the details
en
