How to remove motorcycle tubeless tires
Motorcycle tubeless tires have gradually become a mainstream choice due to their design that does not require inner tubes. However, disassembly of tubeless tires requires certain skills and tools. This article will introduce the operation steps and precautions in detail, and attach the hot topic data of the entire Internet in the past 10 days for reference.
1. Necessary tools for disassembling tubeless tires
| Tool name | Instructions for use |
|---|---|
| Tire levers (2-3 pieces) | Separate bead and hub edge |
| Valve core removal tool | Release the remaining air pressure in the tire |
| Soapy water/lubricant | Reduce friction between tire lip and wheel hub |
| Rubber hammer | Assisted tire alignment |
2. Detailed disassembly steps
1.Safety preparation: Place the motorcycle on a stable stand to ensure that the wheels are suspended in the air without stress.
2.deflation operation: Use the valve core tool to completely remove the valve core and ensure there is no residual air pressure in the tire.
3.fetal lip separation: Insert the pry bar into the joint between the tire lip and the wheel hub, and gradually pry it open along the circumference (it is recommended to start from the opposite side of the valve).
4.Bilateral disassembly: When one side of the bead is completely detached, flip the wheel hub and repeat the operation on the other side.
5.Take out the tire: Tilt the wheel hub at a 45-degree angle and remove the tire as a whole.
3. Operation precautions
| Risk point | Precautions |
|---|---|
| Scratched wheel hub | Wrap the contact surface of the pry bar with soft cloth |
| tire lip rupture | Avoid excessive force at a single point |
| Tool slipping | Keep work area dry |
4. Reference for hot topics on the Internet in the past 10 days
| Ranking | Topic content | heat index |
|---|---|---|
| 1 | Troubleshooting motorcycle ABS system | 92,000 |
| 2 | Controversy over the implementation of new national standards for electric vehicles | 87,000 |
| 3 | Summer Tire Care Guide | 74,000 |
| 4 | Evaluation of self-hydration effect of tubeless tires | 69,000 |
5. Frequently Asked Questions
Q: Can it be operated without a professional pry bar?
A: You can use a flat-head screwdriver instead, but you need to pay attention to the control. It is recommended to use professional tools first.
Q: What should I do if the tire is too tight and cannot be pried open?
A: You can pour hot water on the tire lip to soften the rubber, or use a special tire disassembly machine to assist.
6. Technical parameter reference
| Tire specifications | Recommended prying depth | maximum endurance |
|---|---|---|
| 17 inches | 2-3cm | 50kgf |
| 19 inches | 3-4cm | 70kgf |
Mastering the correct tubeless tire removal method can not only improve repair efficiency, but also avoid damage to the wheel hub and tire. It is recommended that first-time operators work under the guidance of professionals and regularly check tire wear to ensure driving safety.
check the details
check the details
en
